Unless lights are flickering, breakers keep going off or you want to upgrade an older home, most homeowners won’t think about rewiring their house. It makes your home much safer and more efficient and the cost is not insignificant. This is what I want to help you figure out: how much you realistically need to spend. This blog explains how much does it cost to rewire a house, what makes rewiring cost different, compares price ranges and talks about materials, workers and regional differences. If you are rewiring just a room or your whole house, you can use this blog to decide wisely.

Average Cost to Rewire a House

Let’s take a closer look at how the scope of the project can affect how much the costs will be. It serves to find out if you should rewire the whole home or only upgrade selected areas.

Room-by-Room Rewiring Cost Estimates

• Rewiring cost in bedroom or office lies between $800 to $1,200.
• Kitchen rewiring costs between $2000 to $6000.
• Bathroom rewiring costs between  $1,000 to $2,500
• Rewiring cost in living Room lies between $1,000 to $2,000
• Garage or Basement costs between $1,000 to $2,000

Generally, we need to spend more on kitchen and bathroom rewiring since these areas must handle GFCI outlets, many appliances and water resistance. There are more circuits in these rooms, and even more careful safety measures are put in place.

Whole House Rewire Cost vs. Partial Rewire

The price for rewiring your home fully can be anywhere from $8,000 to $15,000 due to home size and design. If your project involves upgrading certain rooms or electrical paths, the cost could be as low $1,500 and as high as $5,000.

In many cases, homeowners decide on partial rewiring for immediate repair or to make one area comply with codes. This method can help save money, yet you might have to update all your wiring if your system hasn’t been upgraded in decades.

Price to Rewire a House with Upgraded Electrical Panel

If your panel is old, you will most likely need to install a new one when you rewire. Since we rely on many useful appliances and smart devices, a modern electrical panel is needed to manage the rising use of electricity. Changing your control panel raises the cost by $1,500 to $3,000 and is important for both safety and functionality.

Additional Costs to Consider

Remember that there are other, less obvious expenses that happen during a rewiring job.

Permit and Inspection Fees

All electrical work should be approved by the local municipality before it is used. Permit and inspection prices can be anywhere from $200 to $1,000, depending on your location. The money is important for making certain the project is completed to code and safety regulations.

Wall Repair and Painting After Rewiring

Should your house not have exposed wiring such as in an unfinished basement, your electrician will need to run cables through your walls. Once you complete the job, you’ll likely need to fix the drywall and paint again. Depending on the amount of space to repair and your preferred finish, these repairs may cost from $1,000 to $3,000.

Costs for Smart Home Wiring Upgrades

Since you’re already working on the rewiring process, now could be the right moment to improve your home for the future.

·         The cost for Ethernet wiring is anywhere from $300 to $1,000.

·         You can buy smart light systems for between $500 and $2,000.

·         Controls for smart homes and panels cost between $1,000 and $5,000.

Incorporating smart wiring is beneficial for both your home’s connectivity and energy bills, but doing so bumps up the entire project cost.

Key Factors That Influence Rewiring Costs

Some rewiring work is better than others. Many things will affect how high or low your pay will be at your job.

Size and Age of the Home

The size of your new home greatly impacts what you will pay for it. Adding more wiring, circuits and doing more work on a larger home makes the construction cost increase. Doing the electrical work in a modest 1,000 sq. ft. house will be much less expensive than in a bigger 3,000 sq. ft. home.

In addition, older homes frequently have their own set of problems. If you own a house built before 1970, there’s a possibility that its electrical wiring, knob-and-tube or aluminum, is not considered safe anymore. Take care of these items and ensure they work with new wiring, as it will be more work and time, with a higher price.

Type of Wiring

The kind of wiring affects the results too.

Romex is the most common choice in homes today because it is economical and simple to install. In certain locations and for commercial buildings or locations with strict electrical standards, laws may require conduit wiring for all wiring in a building.

Conduit installation takes more time and expertise, it usually costs more. Sometimes, electricians will advise you to install conduit in specific rooms to offer greater protection and comply with local standards. You’ll need to spend more in the beginning, but it can bring greater safety and last longer.

Accessibility and Labor Rates in Your Area

Inspectors struggle more and it costs more to check homes that have finished walls, close crawl areas or complicated designs. Having electricians first open up walls or ceilings for new wiring will result in a longer assignment and greater expense. How much you pay for labor depends greatly on your location. In places with a higher cost of living for example, Los Angeles, New York City or San Francisco, rates will be higher. Installation labor accounts for approximately 70% of the cost to rewire.

Cost of Electrical Wiring Materials Like Romex

We also shouldn’t ignore the materials. Because copper is used in most wiring and its price can rise or fall often, that can directly impact your project’s budget. Most often, Romex wiring comes with a price tag between $0.30 and $1.50 per foot which can vary based on specifications. There are additional things like breaker panels, outlets, switches, junction boxes and protection coverings and they all increase your budget. Using premium materials at the outset can be pricier, but it means you won’t need to fix or replace them as frequently.

Conclusion

Doing home rewiring may seem a little scary, but it’s one of the main upgrades you can make. Knowing all your costs is important, whether you are improving your property’s style or making it more efficient and safe.

We at Exclusive Electric Service offer full and partial home rewiring, electrical panel upgrades and custom wiring services for intelligent homes. Licensed electricians, straight-forward pricing and excellent service are available from us to Pompano Beach, FL and the surrounding areas. If you want your house to be both safe and use less energy contact us now to book your rewiring consultation.

FAQs